Pressure Tank Cover
FREE SHIPPING
Free Shipping - Please submit a Quote Request for quantities larger than listed below.
| Quantity | Price Per Unit (Free Shipping) |
|---|---|
| 1 | $927.58 |
| 2+ | $881.20 |
| 3+ | $834.82 |
| 10+ | $788.44 |
Pressure Tank Cover · Insulated Fiberglass · 4 Sizes
An above-ground pressure tank is exposed to the same freezes and sun as the wellhead beside it. This pressure tank cover encloses the tank, and in the larger sizes the wellhead and pump with it, under a layered fiberglass shell with a closed-cell urethane foam core. It comes in four sizes, from small pressure tanks up to full wellhead-and-tank installs, all finished in a 20-mil pigmented gelcoat that never needs painting.
- Snap-tight — no fasteners for service
- Fits 4″–12″ casing diameters
- Made in the USA · free shipping
Overview
Shelter the Tank and Everything Around It.
This pressure tank cover drops over an above-ground pressure tank and protects it from freeze damage, UV, and the everyday abuse of being out in the yard. A layered fiberglass shell wrapped around a closed-cell urethane foam core (approximately R-7) holds equipment heat in, and a 20-mil pigmented gelcoat means the color you order is the color that lasts — no painting, ever.
Pick the size that fits your setup: the smaller covers handle a small pressure tank on its own, while the larger sizes enclose the tank together with the wellhead and pump. Snap-tight construction means no fasteners are required for routine service — lift it off, check the tank, set it back down. No anchoring hardware is needed for normal use.
Why Contractors Specify It
Freeze Protection That Holds Up Outdoors
Freeze protection
A closed-cell urethane foam core (~R-7) shields the pressure tank and wellhead through cold snaps from the southern Carolinas to the upper Midwest.
Snap-tight, no fasteners
The cover lifts off and sets back on for routine service — no bolts or hardware to manage in the field.
Gelcoat that lasts
A 20-mil pigmented gelcoat resists UV and weather and never needs painting — stackable for distributor freight efficiency.
Specifications
Pressure Tank Cover — Size Options
| Size | Dimensions (L × W × H) | Best for |
|---|---|---|
| Small Standard | 18″ L × 18″ W × 22″ H | Single wellhead, small pressure tank, compact pump |
| Small-Medium Standard | 33″ L × 22″ W × 24″ H | Wellhead plus a small tank or dual-line setup |
| Medium Standard | 40″ L × 35″ W × 38″ H | Full wellhead-and-tank install, mid-size pump grouping |
| Large Standard | 58″ L × 34″ W × 44″ H | Larger wellhead, tank, and pump groupings |
| Material | Layered fiberglass shell with urethane foam core |
| Finish | 20-mil pigmented gelcoat — no painting required |
| Insulation | Closed-cell urethane, approximately R-7 |
| Casing diameters | 4″ – 12″ standard (custom on request) |
| Colors | Forest Green or Almond |
| Construction | Snap-tight — no fasteners required for service |
| Origin | Made in the USA — Mount Ulla, North Carolina |
| Shipping | Free shipping to all 50 states |
Color Options
Two Gelcoat Finishes
Forest Green
Blends into lawns and landscaping
Almond
Neutral tone for gravel, beds, and hardscape
Gallery
A Closer Look
FAQ